Iron Solder Repair Tools Kit Electric Rework Soldering with Multimeter Tools

Description

新建网页 2
新建网页 2
Solder Tools
With the development of science and  technology, electronic technology penetrates into various industrial  sectors and in all areas of life.As a electric enthusiast,it's an  essential basic skill to install and weld of electronic products.In the  electronic engineering practice, by assembling and debugging an  electronic product,can improve the way of thinking, especially in  ability.
Electric Soldering Iron
Electric soldering iron uses the advanced  optimization design and meticulously product.The handle is made of new  high-strength and heat-resistant material,and it's also with  high-quality and durable heating element.The iron has the festure of  safe, beautiful look and lightweight.So it becomes more and more  popular.
Specifications:
Name
Electric Soldering Iron
Power
40w
Voltage
110V
Length
23cm (9")
Note:
The first time using the new electric iron, is powered by hot child may  appear , it's normal to have slight smoke which is because of electric  heating element electrified ,and it will disappear later.
Electric iron should be kept dry, and never using after wet or rained.
Please check the voltage before using it.
Soldering Smoke Absorber
Mount the CXG493 Soldering  Smoke Absorber on this optional Arm Stand,and you have a powerful smoke  absorber that can freely adjusted for maximum ease of using and optimum  smoke absorption.Once the job is done,the unit can be quickly and easily  swung to one side,where it will be out of the way but ready in an  instant when needed for the next job.
CGX493 is a newly  developed product which is a high performance fan and an activated  carbon filter designed to absorb flux and lead fumes.
Specifications:
Name
CGX493 Soldering Smoke  Absorber
Power Consumption
16W(50Hz)/14W(60Hz)
Outer Dimensions
220*270*168mm(8.7"*10.6"*6.6")
Weight
1500g (3.3lbs)
Operation Instruction:
Open the Filter Guider,and install the Activated Carbon Filter.Then  close the Filter Guide.
Loose the Knob and adjust the angle.
Replace the Filter
Under normal operating conditions,the filter should  be replaced once a month since absorption capacity decline.
The filter may also need replacement when the dust adhere.(Never allow  the filter to become wet.)
Activated-Carbon Filter Specifications:
Size
130*130*10mm(5.1"*5.1"*0.4")
Amount of  Activated-Carbon Filter
7g (0.02lb)
Max.absorbing  weight of noxious components per filer
2g (0.004lb)
Hot Glue Gun and Glue  Stick
The hot glue gun uses high-technology  ceramic PTC thermistor as heating originals.The PTC thermistor can be in  constant temperature automatically.The temperature will not raise when  the temperature raises to the designed one of the glue stick ,this can  prevent the hot glue gun from the damage of heating element,and  extending the service life.
Features:
1、The product can be applied to the glue stick which is  10mm(0.4")diameter.
2、The glue stick is inserted into the end of glue gun until is inside.  Plugging in and preheating 5-8 minutes.Pulling the trigger to extruded  sol, and can control the volume.
3、During the using,it's not necessary to remove the glue stickif you  can't use up it.Next time,it can be used directly after preheating 5-8  minutes.
Specifications:
Name
Hot Glue Gun
Power
40w
Length
130mm (5")
Digital Multimeter and Digital Electrical Tester Pen
DT9205A digital multimeter is easy to  operate, accurately reading, full-featured,easy to carry.
Specifications:
Name
DT9205A Digital Multimeter
DC Voltage
200mV-1000V ±(0.5％+1)
AC Voltage
200mV-750V ±(0.8％+3)
DC Current
20mA-20A ±(0.8％+1)
AC Current
20mA-20A ±(1％+3)
Resistance
200Ω－2000MΩ ±(2.5％+3)
Capacitance
2nF-200μF
Digital electrical tester pen is a kind  of tester pen, which belongs to electrical and electronic tools,and is  used to test whether charged in the electric wire.This tester pen body  is with LED display,you can read the tested voltage directly.
Specifications:
Name
Digital Electrical Tester Pen
Voltage
12-250V（AC\DC）
Anti-static Tweezers  and Solder Sucker
ESD-10(Standard):
using  to weld circuit boards and installing or replacing parts
ESD-11:
Longer  than ESD-10,appling to precision electronic parts operation.
ESD-12(high elasticity):
The  tweezers tip is stronger than standard's.It won't bend during clipping  board with strong force and the parts won't fall.
ESD-13 (round):
Avoiding to damage components and appling to take  out chip.
ESD-14(fine):
The tweezers tip is extra-fine and sharp,appling to  high-density integrated circuit chip operation.
ESD-15:
The tweezers tip is curved,appling to take out components  in narrow place.
Solder Sucker
is  made of aluminum.It is easy to carry and operate.
Component Package
Diode Package
8 kinds, total  100 pcs
1N4148 25pcs
1N4007 25pcs
1N5819 10pcs
1N5399 10pcs
FR107 10pcs
FR207 10pcs
1N5822 5pcs
1N5408 5pcs
Ceramic Capacitor  Package
24  kinds, 10pcs in each kind
6P
10P
18P
20P
22P
25P
30P
33P
47P
68P
101P
221P
331P
471P
681P
102P
222P
332P
472P
103P
223P
333P
473P
104P
Resistor Package
25 kinds, 20 pcs in each kind
10
47
100
200
330
470
680
1K
1.5K
2K
3.3K
4.7K
6.8K
10K
15K
20K
33K
47K
68K
100K
150K
330K
470K
1M 2M
Adjustable  Resistor Package
9kinds, 5 pcs in each kind
100(101)
500(501)
1K(102)
5K(502)
10K(103)
50K(503)
100K(104)
500K(504)
1M(105)
Electrolytic Capacitor  Package
12  kinds, 10 pcs in each kind
0.1UF/50V
1UF/50V
3.3UF/50V
4.7UF/50V
10UF/25V
22UF/25V
33UF/25V
47UF/25V
100UF/25V
220UF/25V
330UF/25V
470UF/25V
XTL Package
10 kinds, 3 pcs in each kind
6MHZ
8MHZ
11.0592MHZ
12MHZ
16MHZ
22.1184MHZ
20MHZ
24MHZ
32.768KHZ
48MHZ
Audion Package
11  kinds, 10 pcs in each kind
S9012
S9013
S9014
S9015
S9018
2N3904
2N3906
2N5551
2N5401
S8050
S8550
Universal Circuit Board
Universal Circuit Board are accordance  with standard IC spacing (2.54MM,0.1") and full with bonding pads.We  offer different sizes of circuit boards,enthusiast can instrument  components on their own wishes.
specifications:
1、There is two bonding pads on both sides,and it can be welded  components on both sides.
2、The thickness of the circuit boards is 1.6mm（0.06"),and is in good  material.
3、Single hole, the distance between two holes is 2.54mm(0.1"), and the  diameter is 0.95mm(0.04") .
4、The bonding pad which both sides of one hole is connected
新建网页 2
Shipping & Handling  Details
Default Shipping Cost or Free  Shipping Information:
▲
Default  shipping cost or free shipping service is only for the lower 48 United  States by UPS Ground or USPS. Other areas or needs other shipping ways,  please contact us.
▲
Buyers  from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii,  PO Boxes, APO/FPO addresses or other countries/areas,
there  WILL be extra shipping costs, please contact us for more detailed  information.
▲
Please  make sure your address is valid for both UPS and USPS services. Any  costs incurred because of incorrect or undeliverable address should be  undertaken by buyer.
Handling  Time:
Shipping  is usually made in 1-3 business days after payments cleared. Orders are  processed from Monday-Friday; Not on the weekends & public  holidays.
Sales tax /  Customs duties:
Any  sales taxes or Customs duties are not included. If came out, they must  be undertaken by the buyer. Sales Tax of 8% will be applied for orders  shipped within the state of  California.
Damage In  Shipping:
Email or  call us First! We will work with you to get the case resolved in the  fastest method.
Return /  Refund
If you are not 100% happy with your  purchase, please contact Us. Please don't directly opened a request or  case without informing us, or else, we will do some discounts on the  warranty and other sales-services later on. Hope for your  understanding.
Returns &  Exchanges
▲
All  returns must be made within 14 days of delivery date. Items must be in  new, unused condition, with all original materials included with the  shipment. A partial refund may be applied for opened or damaged items,  depending on the condition.
▲
Items  returned under the buyer’s remorse: The return shipping fee must be  covered by the buyer; The original shipping cost will also be deducted  from the refund. 15% restocking fee of the items purchase price will be  charged.
▲
Returns  that are the result of our seller's error: Buyer will receive a full  refund of the item as well as shipping charges
▲
All  returns require a RA (Return Authorization) number that will be given by  our seller. Please contact with us at first for more  details.
Defective & Damaged Products
▲
If  product was received damaged or not as described, please send us some  pictures or videos, so we could well understand your problem, then solve  them for you ASAP. Besides, it's much helpful for us to claim with UPS,  remind our related department to pay much more attention to packaging  later on. Hope for your understanding.
▲
Replacement  or refund of defective or damaged products can only be returned in  exchange for the exact same product, or else, the purchase price will be  refunded back to your original payment method.
▲
If  an item is received damaged, customer service must be contacted within 7  days of receiving your item. All returns require a RA (Return  Authorization) number as  above.
Payment
PayPal:
PayPal  preferred only with a confirmed address. We want you to feel secure  in your purchase. Keep everything within PayPal and eBay protects  both buyer and seller.
eCheck Issues:
Payments  via eCheck do not clear immediately. Usually you will wait 5-7 days  after checkout for it to clear. Then we will arrange shipments for  you.
Warranty &  Feedback
▲
6  months' warranty for the machines, not for the consumables. We stand  behind our products all the item, so even if your warranty period has  expired, you can still seek for service or technical support from us  with low cost.
▲
Any  warranty shipping cost to us is responsible by buyer.
▲
Any  shipping cost to buyer is responsible by the seller.
▲
We  committee to the customer satisfaction and want to bring you the best  purchase experience. If there is any problems, please contact us ASAP.  If not, please leave us a positive feedback as it's very important for  us. Thanks very  much.